Guide for short-term let hosts

Record your licence, keep the certificates it needs in date, make sure every listing shows the right wording, renew in time and work out the visitor levy.

Get started

  1. Start a free trial

    Sign in, choose "I run holiday or short-term lets", then start the trial with your business or trading name (or your own name if you let in it). Hosts and agencies use the same kind of workspace.

    Start a free trial

  2. Add your properties

    Import a spreadsheet with each address and postcode, or import your licences straight away (see below): each licence row adds the property to Stays.

  3. Mark each one as a short-term let

    On the property's page, under "How is this property let?", choose "Short-term let" (or "Both" if you let it to a tenant at other times) and choose "Save how it is let".

Good to know: A short-term let gets the licence's safety checks instead of the tenancy ones. A property let both ways gets both.

Record the licence

  1. Choose "Add the licence"

    On the property's page, in the "Short-term let" section.

  2. Fill it in from the licence

    The council, licence number, type, status, the date it was granted, the expiry date and the maximum number of guests. If you leave the expiry date blank, the council's usual term is used. Type the licence number first: Inglewise suggests the council and the kind of licence from it (the letter at the end: F full, T temporary, E temporary exemption, P provisional, R renewed). Some councils print other letters, such as Midlothian's N: type the number exactly as the licence shows it, because your listings must show it that way.

  3. Add any local conditions

    Under "Local conditions the council added", add each one and tick it when it is met. They appear in the renewal pack.

  4. Or import them all at once

    On "Short-term lets", under "Import licences", upload a spreadsheet saved as CSV. Download the template to see the columns. Rows are matched by postcode.

Planning and the council's register

Under the licence, each let's record shows whether its planning position is in order for the council's control area, anything odd about the licence number, and whether you have found the licence on the council's public register.

  1. Record the planning position

    In a control area, a secondary let (a home that is not where you live) usually needs planning permission. Edit the licence and choose the planning status and reference. Lets still to record show as "Planning to record" on the dashboard and in the renewal pack.

  2. Read any notes on the number

    If the number does not look like a Scottish licence number, or its letters belong to a different council, you are told. Check it against the licence.

  3. Look it up on the register

    Choose "Open the register", find your licence, then choose "I found it on the register". If the licence number changes later, you are asked to look again. Councils publish their registers in different ways, so Inglewise does not read them for you.

Keep the certificates in date

The licence's mandatory conditions include gas safety, electrical checks, appliance tests, alarms, legionella, furniture fire safety, a fire risk assessment, insurance and information for guests.

  1. Record each check

    In the property's "Compliance" section, choose "Record check" and enter the date it was done. Attach the certificate if you uploaded it.

  2. Mark what does not apply

    Choose "Does not apply" and say why, for example "no gas supply".

  3. Watch the alerts

    Expired and soon-due certificates appear in your alerts and digest emails.

Show guests the safety information

Every licensed let must display, where guests can see it, a certified copy of the licence and its conditions, fire, gas and electrical safety information, how to call the emergency services, and the gas safety report and electrical condition report.

  1. Write it once

    On the property's page, under "Information for guests", choose "Write it": who guests call, the address for the emergency services, escape routes, the fire equipment, how to turn off the gas, electricity and water, and the carbon monoxide alarm.

  2. Print the pack

    Choose "Download the guest pack". The licence details and certificate dates are filled in. If anything is still to write, a last page says what; remove it before you display the pack.

  3. Record it

    Put the pack and the certified copy of the licence on display, then choose "It is on display". That completes the "Information displayed for guests" check for the year.

Keep your listings right

Every listing must show the licence number, the maximum number of guests and, for a whole home, the EPC rating.

  1. Copy the wording

    Under "Listings", choose "Copy the wording" and paste it into each listing's description.

  2. Add each listing

    Choose where it is listed, paste its web address and choose "Add listing".

  3. Confirm it

    Look at the listing, then choose "It shows the wording". If the licence number, the maximum number of guests or the EPC rating changes, Inglewise asks you to check again. It also asks every quarter, because a platform can change a listing without telling you.

Good to know: Inglewise does not read your listings: the platforms do not allow it. It remembers what you confirmed.

Renew in time

  1. Watch for the reminders

    Inglewise reminds you before the licence expires, at the times your council's details set.

  2. Download the renewal pack

    On the property's page, choose "Download the renewal pack": the licence, every certificate and where it stands, the local conditions and your listings.

  3. Apply before it expires

    Apply through your council, then enter the date under "Date you applied to renew". Applying in time keeps the licence in force until the council decides.

  4. Check a date without signing in

    The renewal check works out the expiry date and the reminder dates from the council and the grant date.

    Licence renewal check

Work out the visitor levy

  1. Export your bookings

    Airbnb's transaction history (Earnings, then export to CSV), Booking.com's reservations export, or your channel manager's. Payout and adjustment lines, cancellations and no-shows are recognised and left out. A "Property" or "Listing" column puts each booking against its let; "Guests" and "Rooms" columns are used where a levy is charged per person or per room.

  2. Upload it

    On "Short-term lets", under "Visitor levy worksheet", choose the council's levy and the file. Tick "My prices include VAT" if you are VAT registered, and choose whether a stay counts in the quarter of its last night or its check-in date, as your council says.

  3. Use the totals

    Choose "Work out the levy". You get the levy per booking, per quarter and per let (a return lists each let separately), the share you keep and the amount to pay. Choose "Download the worksheet" and keep it: the council can ask for records for five years. "Download a PDF record to keep" gives the same figures, dated, as a PDF for your files. It is a record, not the return itself.

  4. Make the return

    Make the quarterly return on visitorlevy.scot. Airbnb does not collect the levy for you. Inglewise reminds you after each quarter ends.

    Visitor levy calculator for one stay

Good to know: The file is read once and not stored, and guest names in it are not read. The figures follow the council's published scheme, which we check every day; check its guidance before making a return.

See every let at once

  1. Open "Short-term lets"

    In your workspace's menu. Every short-term let, most urgent first, with its licence, expiry and listings.

  2. Download it

    Choose "Download as a spreadsheet" (you confirm with your passkey).

  3. Download every pack at once

    Under "Packs for every let", choose renewal packs, guest packs or both, then "Download (ZIP)". There is a folder for each let and an index. Guest packs are included only for licensed lets.

Last checked against the screens and official pages on 13 November 2026. Still stuck? See Help or tell us below.

Report a problem with this page

At least 10 characters. Please do not include passwords, bank details or other people's personal information.

Only if you would like a reply. We use it for this report alone.